Harman Kardon AVR 8500 Manuale Utente Scaricare il pdf (Pagina 39)

ADVANCED FEATURES 39

Advanced Features

The AVR 8500 is equipped with a number of

advanced features that add extra flexibility to

the unit’s operation. While it is not necessary to

use these features to operate the unit, they pro-

vide additional options that you may wish to

use.

Speaker Reset

In some cases you may wish to reset the speaker

configuration to the factory settings. To restore

those settings you will need to make an adjust-

ment in the ADVANCED menu. To start the

adjustment, press the OSD button

to bring

the MASTER MENU to the screen. Press the

⁄

Button

twice, until the on-screen

›

cur-

sor is next to the ADVANCED line. Press

the Set Button

to enter the

ADVANCED menu (Figure 11).

Figure 11

To reset the speaker configuration to the factory

default, press the

›

Button



so that the

word ONis highlighted and then press the Set

Button

Once the speaker settings are reset you may

press the

Buttons

to continue with

adjustments on this menu. If no other

adjustments are needed, press the OSD Button

to exit the menu system.

Display Brightness

The AVR 8500’s front panel Main Information

Display

is set at a default brightness level

that is sufficient for viewing in a normally lit

room. However, in some home theater installa-

tions, you may wish to occasionally lower the

brightness of the display, or turn it off completely.

To change the brightness setting, at the

ADVANCED menu, make certain that the

on-screen

›

cursor is next to the VFDline,

and press the

›

Button



until the desired

brightness level is highlighted in the video dis-

play. When FULL is highlighted, the display is

at its normal brightness. When HALF is high-

lighted, the display is at half the normal bright-

ness level. When OFF is highlighted, all of the

indicators in the Main Information Display

will go dark. Note, however, that the green

LEDs for the Input Indicators

and the

Surround Mode Indicators

, as well as for

the Power Indicator

, will always remain lit

to remind you that the unit is turned on.

Once the desired brightness level is selected, it

will remain in effect until it is changed again or

until the unit is turned off.

If you wish to make other adjustments in the

menu, press the

⁄

Buttons

until the on-

screen

›

cursor is next to the desired setting or

the BACK TO MASTER MENU line

and press the Set button

. If you have no

other adjustments to make, press the OSD

Button

to exit the menu system.

Turn On Volume Level

As is the case with most audio/video receivers,

when the AVR 8500 is turned on, it will always

return to the volume setting in effect when the

unit was turned off. However, you may prefer to

always have the AVR turn on at a specific set-

ting, regardless of what was last in use when

the unit was turned off. To change the default

condition so that the same volume level is

always used at turn-on, you will need to make

an adjustment in the ADVANCED menu. To

start the adjustment, press the OSD button

to bring the MASTER MENU (Figure 1) to

the screen. Press the

⁄

button

twice, until

the on-screen

›

cursor is next to the

ADVANCED line. Press the Set button

to enter the ADVANCED menu (Figure 11).

At the ADVANCED menu make certain that

the on-screen

›

cursor is next to the VOLUME

DEFAULT line by pressing the

⁄

buttons

as needed. Next, press the

›

button



that the word ONis highlighted in the video

display. Next, press the

button

once so

that the on-screen

›

cursor is next to the

DEFAULT VOL SET line. To set the

desired turn-on volume, press the

‹

›

buttons

E

or hold them pressed until the desired

volume level is shown on the DEFAULT

VOLSET line. Note that this setting may

NOT be made with the regular volume controls.

NOTE: Since the setting for the turn-on volume

cannot be heard while the setting is being made,

you may wish to determine the setting before

making the adjustment. To do this, listen to any

source and adjust the volume to the desired

level using the regular volume controls



When the desired volume level to be used at

turn-on is reached, make a note of the setting as

it appears in the lower third of the video screen

or in the Main Information Display

A typical volume level will appear as a negative

number such as -25dB. When making the adjust-

ment, use the

‹

›

buttons

E

to enter this

setting.

Unlike some of the other adjustments in this

menu, the turn-on volume default will remain in

effect even when the unit is turned off

completely, unless it is changed or turned off in

this menu.

If you wish to make other adjustments in the

menu, press the

⁄

Buttons

until the on-

screen

›

cursor is next to the desired setting or

the BACK TO MASTER MENU line

and press the Set button

. If you have no

other adjustments to make, press the OSD

Button

to exit the menu system.

* ADVANCED *

VFD :FULL HALF OFF

VOLUME DEFAULT:OFF ON

DEFAULT VOL SET:?25dB

SEMI OSD :OFF ON

SEMI OSD TIME OUT: 35

FULL OSD TIME OUT:205

BACK TO MASTER MENU

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 53 54

Commenti su questo manuale

Nessun commento

Harman Kardon AVR 8500 Manuale Utente Pagina 39

Commenti su questo manuale

Prodotti e manuali riguardandi Ricettore AV Harman Kardon AVR 8500